UMI Performance 05-10 Ford Mustang Adjustable Upper Control Arm - 1047-R

UMI Performance

MSRP: $149.99
$136.79
(You save $13.20 )
SKU:
UMI1047-R
UPC:
1047-R
Shipping:
Calculated at Checkout
MPN:
1047-R
Product ID:
536519
Spacer Kit: Part #1058 spacer kit designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking! Note: This kit is designed to work with the OEM upper control arm mount. It will work only on aftermarket control arm mounts that use a 16mm hole. Most aftermarket companies supply there new upper mounts with 14mm holes.

This Part Fits:

YearMakeModelSubmodel
2005-2014FordMustangBase
2012-2013FordMustangBoss 302
2008-2009FordMustangBullitt
2005-2014FordMustangGT
2007-2008FordMustangShelby GT
2007-2014FordMustangShelby GT500
2008-2009FordMustangShelby GT500KR
This Part Fits:

YearMakeModelSubmodel
2005-2014FordMustangBase
2012-2013FordMustangBoss 302
2008-2009FordMustangBullitt
2005-2014FordMustangGT
2007-2008FordMustangShelby GT
2007-2014FordMustangShelby GT500
2008-2009FordMustangShelby GT500KR

Related Products