Holley EFI Dominator EFI GM Drive-By-Wire Harness

Dominator EFI GM Drive-By-Wire HarnessFeaturesBase Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.Total Height with 92/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.Port Size – 2.49” Height x 1.21” WideMounting Flange Gasket Type – Standard LS3 Molded O-RingPlenum Top Gasket Type – 3/32” Round O-ring CordThrottle Body Flange Location, with 92/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)Runner Length – 6.50”, As-Cast Runner Cross-Sectional Area – Tapered 4.25 in² to 2.77 in²Intended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM