aFe Scorpion 2-1/2in Aluminized Steel Cat-Back Exhaust 07-18 Jeep Wrangler (JK) V6 3.6L/3.8L (2/4dr) - 49-08055

aFe power introduces the Hi-Tuck "Rock Basher" (RB) Scorpion cat-back exhaust system for 2007-2018 Jeep Wrangler (JK) 2 and 4 door models. Constructed of 2-1/2" mandrel-bent aluminized steel tubing, the smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system includes a 14" length, 409 stainless steel, high-flow muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. Fits with most aftermarket Evap skid plates. Flow and Performance: Constructed of 2-1/2" mandrel-bent, aluminized steel tubing for maximum flow, performance and value. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This Scorpion Hi-Tuck system incorporates a high flow 14" length muffler for an aggressive sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. And is perfect for adding an on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power's Glide Guard (Part Number: 46-79001) Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2017	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2017	Jeep	Wrangler	Sport
2016	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2017	Jeep	Wrangler	Unlimited Rubicon
2007-2017	Jeep	Wrangler	Unlimited Sahara
2010-2017	Jeep	Wrangler	Unlimited Sport
2016	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Get the best prices and service on AFE products at Armageddon Turbo Systems (www.goturbo.net). We offer AFE's full line with the the best service possible.

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA. The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California.

The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks. In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts. In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable. aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe's Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.

 

Get your AFE intake, exhaust, suspension or other part today at www.goturbo.net - Armageddon Turbo Systems!