×
click to zoom in

Description

Hide Show

Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS2 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!  Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines
229/232 | .619”/.600” | LSA113+3

Designed for:  LS2, LQ4 and LQ9 Engines (346-364ci) with Cathedral Port Heads (as they're equipped with stock)
Basic Operating RPM Range: 
1600-6400
Expected Horsepower Gains:  40
-45RWHP over the stock camshaft in a well-optimized setup
Expected Torque Gains:
  15-25RWTQ over the stock camshaft in a well-optimized setup
Aftermarket Headers Required: 
No (although longtube headers will allow maximum power gains)
Stall Converter Required: 3000+RPM

Rear Gear Upgrade Required:  Suggested for maximum performance (3.73+ for manual transmissions and automatic)
Works Well with Nitrous: 
Yes (shot size less than 250)
Will Pass Most Smog Emissions:  No

Our Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines is a fresh re-design, perfect for those who want to gain a noticeable amount of power while retaining great street manners and a relatively stockish idle.  We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.)  Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Option Guide: Do I need the 3-Bolt Conversion Kit?
In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear.  All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used.  If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout for an extra $24.99.  This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.)  If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.

1x GM 12586481, 1x ARP 134-1003

Brand:

Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines

MSRP: $449.95
$389.00
You save $60.95
SKU:
SH0012V2
Shipping:
Free Shipping

Description

Hide Show

Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS2 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!  Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines
229/232 | .619”/.600” | LSA113+3

Designed for:  LS2, LQ4 and LQ9 Engines (346-364ci) with Cathedral Port Heads (as they're equipped with stock)
Basic Operating RPM Range: 
1600-6400
Expected Horsepower Gains:  40
-45RWHP over the stock camshaft in a well-optimized setup
Expected Torque Gains:
  15-25RWTQ over the stock camshaft in a well-optimized setup
Aftermarket Headers Required: 
No (although longtube headers will allow maximum power gains)
Stall Converter Required: 3000+RPM

Rear Gear Upgrade Required:  Suggested for maximum performance (3.73+ for manual transmissions and automatic)
Works Well with Nitrous: 
Yes (shot size less than 250)
Will Pass Most Smog Emissions:  No

Our Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines is a fresh re-design, perfect for those who want to gain a noticeable amount of power while retaining great street manners and a relatively stockish idle.  We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.)  Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Option Guide: Do I need the 3-Bolt Conversion Kit?
In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear.  All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used.  If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout for an extra $24.99.  This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.)  If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.

1x GM 12586481, 1x ARP 134-1003

Need help? We're available at505-672-8112 or you may use our Contact Form
to top
”Tick <p><span style="font-size: medium;">Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS2 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!&nbsp; Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine &amp; stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.</span></p> <p style="text-align: center;"><span style="font-size: medium;"><strong>Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines<br /></strong>229/232 | .619&rdquo;/.600&rdquo; | LSA113+3</span></p> <p style="text-align: left;"><span style="font-size: medium;"><em>Designed for:&nbsp; </em>LS2,&nbsp;LQ4 and LQ9 Engines (346-364ci) with Cathedral Port Heads (as they're equipped with stock)<em><br />Basic Operating RPM Range:&nbsp; </em>1600-6400<em><br />Expected Horsepower Gains: &nbsp;40</em>-45RWHP over the stock camshaft in a well-optimized setup<em><br />Expected Torque Gains:</em>&nbsp; 15-25RWTQ over the stock camshaft in a well-optimized setup<em><br />Aftermarket Headers Required:&nbsp; </em>No (although longtube headers will allow maximum power gains)<em><br />Stall Converter Required: 3000+RPM</em></span><br /><span style="font-size: medium;"><em>Rear Gear Upgrade Required:&nbsp; Suggested for maximum performance (3.73+ for manual transmissions and automatic)</em><em><br />Works Well with Nitrous:&nbsp; </em>Yes (shot size less than 250)<em><br />Will Pass Most Smog Emissions: &nbsp;No</em><em><br /></em></span></p> <p><span style="font-size: medium;">Our Tick Performance Street Heat Stage 1 V2 Camshaft for LS2 Engines is a fresh re-design, perfect for those who want to gain a noticeable amount of power while retaining great street manners and a relatively stockish idle.&nbsp; We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.)&nbsp; Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.</span></p> <p><span style="font-size: medium;"><strong>Option Guide: Do I need the 3-Bolt Conversion Kit?</strong></span><br /><span style="font-size: medium;">In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear.&nbsp; All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used.&nbsp; If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout for an extra $24.99.&nbsp; This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.)&nbsp; If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.</span></p> <p><span style="color: #ffffff;">1x GM 12586481, 1x ARP 134-1003</span></p>
389