×
click to zoom in

Description

Hide Show

Please note: Our intake may not fit the 2016 Z06. We have to get one to test first. There may be a running backorder due to the huge volume of orders exceeding our production capacity. Halltech's 2015 Corvette Z06 Stinger-RZ Gen 2 Sealed Cold Air Induction. This is the plastic version of the Halltech Stinger™ CKNZ, which will be identical to the CKNZ intake only XLPE plastic.

The Stinger-RZ™ comes ready to bolt on major hp. Professional installation highly recommended. Have your Halltech dealer order this for you. email us to find the closest dealer to you. If you are looking for the ultimate heat soak protection, we recommend our Stinger CKNZ made with carbon fiber outer and inner layers with Nomex IIIA sandwich material to prevent heat exchange. The two dynos shown were done at the end of June at A&A Corvette in Ventura, CA. Both were Automatics, both on 91 Octane. The first did +44 RWHP/39 lb-ft torque (55 HP/48.8 lb-ft at the flywheel); the second Z06 did a mind numbing +50 RWHP/43 lb-ft (62.5 HP/53.8 lb-ft at the flywheel) By comparison, the engine dyno showing +60 HP gain was done in Germany at Geiger Performance on a Superflow Engine dyno (baseline was 659 HP; intake only 720 HP. This is the real deal folks. We have now over 13 dynos substantiating these numbers, all done by independent shops and without solicitation from Halltech. Our proprietary K&N high flow filter comes installed on all orders. Our Halltech Blood Orange dry filter is optional, but will filter slightly better, and produce 5 more hp. 44 RWHP - 50 RWHP is the average

Brand:

Halltech Stinger-RZ Cold Air Intake System - 2015 Chevrolet Corvette Z06 (6.2L LT4 V8)

MSRP: $679.95
$639.95
You save $40.00
SKU:
STRZ
Shipping:
Calculated at Checkout

Description

Hide Show

Please note: Our intake may not fit the 2016 Z06. We have to get one to test first. There may be a running backorder due to the huge volume of orders exceeding our production capacity. Halltech's 2015 Corvette Z06 Stinger-RZ Gen 2 Sealed Cold Air Induction. This is the plastic version of the Halltech Stinger™ CKNZ, which will be identical to the CKNZ intake only XLPE plastic.

The Stinger-RZ™ comes ready to bolt on major hp. Professional installation highly recommended. Have your Halltech dealer order this for you. email us to find the closest dealer to you. If you are looking for the ultimate heat soak protection, we recommend our Stinger CKNZ made with carbon fiber outer and inner layers with Nomex IIIA sandwich material to prevent heat exchange. The two dynos shown were done at the end of June at A&A Corvette in Ventura, CA. Both were Automatics, both on 91 Octane. The first did +44 RWHP/39 lb-ft torque (55 HP/48.8 lb-ft at the flywheel); the second Z06 did a mind numbing +50 RWHP/43 lb-ft (62.5 HP/53.8 lb-ft at the flywheel) By comparison, the engine dyno showing +60 HP gain was done in Germany at Geiger Performance on a Superflow Engine dyno (baseline was 659 HP; intake only 720 HP. This is the real deal folks. We have now over 13 dynos substantiating these numbers, all done by independent shops and without solicitation from Halltech. Our proprietary K&N high flow filter comes installed on all orders. Our Halltech Blood Orange dry filter is optional, but will filter slightly better, and produce 5 more hp. 44 RWHP - 50 RWHP is the average

Customers Also Viewed

Need help? We're available at505-672-8112 or you may use our Contact Form
to top
”Halltech <p><span>Please note: Our intake may not fit the 2016 Z06. We have to get one to test first. There may be a running backorder due to the huge volume of orders exceeding our production capacity. Halltech's 2015 Corvette Z06 Stinger-RZ Gen 2 Sealed Cold Air Induction. This is the plastic version of the Halltech Stinger&trade; CKNZ, which will be identical to the CKNZ intake only XLPE plastic. </span></p> <p><span>The Stinger-RZ&trade; comes ready to bolt on major hp. Professional installation highly recommended. Have your Halltech dealer order this for you. email us to find the closest dealer to you. If you are looking for the ultimate heat soak protection, we recommend our Stinger CKNZ made with carbon fiber outer and inner layers with Nomex IIIA sandwich material to prevent heat exchange. The two dynos shown were done at the end of June at A&amp;A Corvette in Ventura, CA. Both were Automatics, both on 91 Octane. The first did +44 RWHP/39 lb-ft torque (55 HP/48.8 lb-ft at the flywheel); the second Z06 did a mind numbing +50 RWHP/43 lb-ft (62.5 HP/53.8 lb-ft at the flywheel) By comparison, the engine dyno showing +60 HP gain was done in Germany at Geiger Performance on a Superflow Engine dyno (baseline was 659 HP; intake only 720 HP. This is the real deal folks. We have now over 13 dynos substantiating these numbers, all done by independent shops and without solicitation from Halltech. Our proprietary K&amp;N high flow filter comes installed on all orders. Our Halltech Blood Orange dry filter is optional, but will filter slightly better, and produce 5 more hp. 44 RWHP - 50 RWHP is the average</span></p>
639.95