Injector Dynamics ID 725

$960.00

From upgrade injectors on V8's running factory Ford or GM ECU's, to OEM supply on everything from emissions legal turbo kits to Noble's 650hp M600, the ID725 is holding its own with the ID1000 and ID2000 which have achieved near cult status in the motorsport community.

Categories: , ,

Description

The ID725 exists for those applications where the ID1000 is just a little bit too big, and will maintain strict linearity at flow rates that will satisfy even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors. With pressure capability in excess of 8 bar, this injector has found a home in many different applications.

BASIC SPECIFICATIONS

Nominal Volumetric Flow Rate – 715cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 8.5 Bar (123.5 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – USCAR

ID725 DYNAMIC FLOW DATA

Fuel Pressure Offset Slope
(psid) (µsec) (cc/min)
8 Volts 10 Volts 12 Volts 14 Volts 16 Volts
40.0 1910 1320 1030 775 660 690
43.5 1975 1355 1040 795 730 715
45.0 2005 1365 1045 800 735 730
50.0 2095 1420 1065 830 770 770
55.0 2185 1465 1090 860 805 810
60.0 2270 1520 1115 895 835 850
65.0 2350 1575 1040 930 860 890
70.0 2440 1630 1175 970 865 925
75.0 2545 1685 1215 1010 905 960
80.0 2675 1740 1265 1045 930 900
85.0 2840 1790 1320 1075 955 1020
90.0 3035 1845 1375 1100 985 1050
95.0 3250 1900 1435 1125 1020 1080
100.0 N/A 1965 1490 1155 1055 1110
105.0 N/A 2040 1540 1185 1020 1140
110.0 N/A 2120 1580 1220 1055 1170
115.0 N/A 2219 1615 1260 1055 1200
120.0 N/A 2300 1650 1300 1070 1235
Print Friendly, PDF & Email